You get to the right size as follows; you place your current browband in a straight line along a ruler / tape measure and take the size that comes from this incl. loops. Is your current browband a little too tight or a little too big then you can of course choose to order the new browband a little bigger or a little smaller. On the photo below an example of a measurement. The browband stops at 42cm, which is the right size that you have to order. * you also fully measure a shared loop
Crystal is a clear (silver) stone, AB crystal lights up in many colors. Below are two examples:
If you miss a stone and the cup is still intact you can place a new stone in the empty cup.
Does not it work? Send your browband with your invoice (to be found in your account) or with a note with your order number and address details to: Frontriemdesign Kibbelgaarn 8 9644 XP Veendam * make sure your shipment is sufficiently franked
We will treat your browband as soon as it is received by us, depending on the busyness and the size of the repair, you will lose your browband about 3-8 working days.
* We only repair Frontriemdesign frontbelts. We can only repair frontbones from other brands in consultation and at a pre-agreed price.
We have a lot of possibilities concerning color stones and color combinations in sizes 3mm, 4mm, 6mm and 8mm. Send us an email with your wishes and we will contact you as soon as possible.
For all the materials you need for making a browband, we kindly refer you to: www.strassketting.nl , here you can buy loose leather, glue and rhinestone chain for making your dreamfrontriem.
All stock products are sent in most cases the same day. However, products specially made for you by hand, such as Frontriemen, custom made riding boots and for example certain bridles have a manufacturing time. With these products you will see an extra tab next to the description. Here you will find the expected shipping date (ie not delivery date). In practice, the products are often delivered faster.
If you ride a horse or work with horses, a cap is an absolute must. A cap protects your head against a blow or fall of the horse, it is therefore very important that your riding helmet fits well. Caps are generally available in sizes between 52 and 61 centimeters (each with an inch of offset), but how do you measure exactly what you still have ?. The above measurements expressed in centimeters are the circumference of your head measured in centimeters. You can measure this by measuring backwards with a measuring tape just above your eyes, over the occiput node again. The total circumference in centimeters indicates the correct size of the cap you need. Pay attention do not pull the ribbon too trak.
A cap must not be jammed on your head and leave a mark on your forehead when taking off your cap. Because of the soft lining you have some play here. What is even more important is that the cap is not too loose. You can check this properly by attaching the riding cap without closure and with the riding cap on your head you can see if it stays in place as soon as you bend your head forward. The riding helmet should remain seated until you sit with your chin on your chest. Make sure that you have the closure properly during riding.